You must first have an OUI or an IAB, to which to append 24 or 12 bits respectively, in a way that makes the resulting bit number unique. No, it depends on the real requirement of your AX target application. Yes, every Ethernet device must have a unique MAC address. If your system is bit system, you should see “bit” in the Windows system information. If you cannot find a workable PC to run these utilities, you can consider using other SROM programming solutions in mass production.
|Date Added:||3 June 2007|
|File Size:||28.47 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
If your end customer may need to install more than one AXbased device on your target application, you should assign a different serial number in the EEPROM for every AX device.
Select the “Properties” of “My Computer” to check if your Windows system is bit or bit system. The updated driver can be downloaded from this link: If you cannot find a workable PC to run these utilities, you can consider using other SROM programming solutions in mass iwndows.
If you have any problems, please contact ASIX’s support support asix. Since the previous Windows 7 or 8.
If your target application always uses one AX device, you can consider assigning the same serial number in the EEPROM for every AX device for easy maintenance in mass production, especially if you plan to use a Windows PC to test AX based devices repeatedly during the mass production test.
Otherwise, it should be a bit system. Do I have to assign a unique serial number to every AX based device? Please refer to Section 7. You must first have an OUI or an IAB, to which to append 24 or 12 bits respectively, in a way that makes the resulting bit number unique. No, it depends on the real requirement of your AX target application.
To continue using , please upgrade your browser.
You can also download and install the driver from our website or from the disk that came with your adapter. However, it will not appear in the CD that comes with the adapter until the next lot of adapters is shipped. Windows Update should see it and automatically winodws the correct driver.
These utilities may not work with other USB host controllers. Yes, every Ethernet device must have a unique MAC address.
Plugable USB 10// Gigabit Ethernet Adapter – Plugable
It depends on your product applications and target market. If you are in a situation where this is not possible, we recommend delaying the update until an internet connection is available, or until this issue has been fixed.
Best viewed at x with IE 8. The only way to accomplish this is to have an internet connection available when you first plug in the USB2-E Upgrading from Windows 7 or Windows 8.
Where to Buy
That will allow Windows Update to download and install the driver. Microsoft Windows XP bit Edition. What is the clock specification of the AX Gigabit Ethernet interface?
Please visit the AX Driver Download web page http: Please visit Mentor Graphics’ web http: However, an installation problem could cause issues with the USB2-E Your 24 or 12 bits must be unique within your organization, which will require coordination among all the users of your organization’s OUI or IAB.
If your system is bit system, you should see “bit” in the Windows system information. You should download the correct AX driver bit or bit for your respective bit or bit system. It can only be done by the manufacturer of your Android tablet PC. Please contact the technical support of your device manufacturer to obtain their driver.
When you insert these adapters into a USB port, the drivers are automatically installed with no need for an internet connection.
The easiest way is to establish an internet connection, either wirelessly or through another Ethernet port, then plug in the USB2-E No, it could not be done by end users.
Where can I obtain the latest AX drivers?